Replacement bulbs & tubes
Download Flyer
New !
Remplace bulbs that last 8 months by Leds whose lifelenght is 10 time longer.
Bulbs to be changed when they have burnt out:
°K500: bulbs for rotating instruments
Genuine lamps: The °K500 set is produced by the genuine bulbs historical manufacturer of the most famous instruments brands.
°K200: bulbs for operating lighting
Bulbs to be changed before the end of thei service lives
°K300:Tubes for general lighting
After a certain period in operation, a bulb will give off less light. This phenomenon becomes more pronounced the greater the number of times the bulb has been switched on.
This is detrimental to your eyes and your work. The standards are no longer complied with: a good colour choice is adversely affected and your vision becomes fatigued.
By regularly replacing the bulbs in your general lighting, you will preserve your vision and the quality of your work.
The rule is never to change one tube only, but the whole sources of the lighting: tubes must be on the same age and the same colour bath in order the lighting system results to be ensured.
Depending on the lightinh brands, tubes must be changed every year or every 2 years or even every 4 to 5 years for degré K's lightings. This longevity depends on tehcnical factors : temperature inside the lighting, parts choice, tubes/ballast matching…
°K100: Bulbs for polymerising devices
As it ages, a halogen lamp emits less blue light and more red light. This is indetectable to the naked eye. Your device will not polymerise nearly so well.
In order to maintain polymerisation quality over time, particularly in terms of depth, your polymerisation device’s halogen bulb must be changed 2 to 3 times a year.
Replacement bulbs & tubes
Download Flyer
New !
°KLED, the one and single LEDs that faithfully provide the colour of gengiva and dentin.
Remplace bulbs that last 8 months by Leds whose lifelenght is 10 time longer.
Bulbs to be changed when they have burnt out:
°K500: bulbs for rotating instruments
Genuine lamps: The °K500 set is produced by the genuine bulbs historical manufacturer of the most famous instruments brands.
°K200: bulbs for operating lighting
Bulbs to be changed before the end of thei service lives
°K300:Tubes for general lighting
After a certain period in operation, a bulb will give off less light. This phenomenon becomes more pronounced the greater the number of times the bulb has been switched on.
This is detrimental to your eyes and your work. The standards are no longer complied with: a good colour choice is adversely affected and your vision becomes fatigued.
By regularly replacing the bulbs in your general lighting, you will preserve your vision and the quality of your work.
The rule is never to change one tube only, but the whole sources of the lighting: tubes must be on the same age and the same colour bath in order the lighting system results to be ensured.
Depending on the lightinh brands, tubes must be changed every year or every 2 years or even every 4 to 5 years for degré K's lightings. This longevity depends on tehcnical factors : temperature inside the lighting, parts choice, tubes/ballast matching…
°K100: Bulbs for polymerising devices
As it ages, a halogen lamp emits less blue light and more red light. This is indetectable to the naked eye. Your device will not polymerise nearly so well.
In order to maintain polymerisation quality over time, particularly in terms of depth, your polymerisation device’s halogen bulb must be changed 2 to 3 times a year.